The Complete Guide To Güde 400/10/50 N: Specifications, Pros And Cons, Troubleshooting, And Buying Tips
Güde 400/10/50 N Information
the information about the Güde 400/10/50 N compressor:
Introduction
The Güde 400/10/50 N is a powerful and versatile oil-lubricated compressor that is ideal for a variety of applications, including DIY, home repairs, and light professional use. It features a 2.2 kW motor, a 50-liter pressure tank, and two 1/4" quick-connect air outlets. The compressor also comes with a number of safety features, including a pressure switch, a pressure relief valve, and an oil sight glass.
Full specifications
The following table summarizes the full specifications of the Güde 400/10/50 N compressor:
| Feature | Specification |
|---|---|
| Motor power | 2.2 kW |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Operating pressure | 0-10 bar |
| Maximum air flow rate | 395 l/min |
| Effective air delivery rate @ 0 bar | 303 l/min |
| Effective air delivery rate @ 4 bar | 218 l/min |
| Effective air delivery rate @ 7 bar | 176 l/min |
| Tank capacity | 50 liters |
| Weight | 41.6 kg |
Features
The Güde 400/10/50 N compressor has a number of features that make it a safe and reliable tool to use:
- Oil lubrication: The compressor's two-cylinder V-type piston pump is oil-lubricated, which helps to extend the life of the compressor and provides a smooth, quiet operation.
- Direct drive: The compressor has a direct drive motor, which means that the motor shaft is directly connected to the compressor shaft. This design provides more efficiency and power than a belt-driven compressor.
- Pressure switch: The compressor is equipped with a pressure switch that automatically turns the compressor on and off to maintain a constant air pressure.
- Pressure relief valve: The compressor also has a pressure relief valve that releases excess air pressure in the event of a blockage or other problem.
- Oil sight glass: The compressor has an oil sight glass that allows you to check the oil level in the compressor.
- Two 1/4" quick-connect air outlets: The compressor comes with two 1/4" quick-connect air outlets, which make it easy to connect air tools and accessories.
What's in the box
The following items are included in the box with the Güde 400/10/50 N compressor:
- Compressor
- 50-liter pressure tank
- 2.2 kW motor
- Oil sight glass
- 2 x 1/4" quick-connect air outlets
- Pressure switch
- Pressure relief valve
- Transport wheels
- Transport handle
- Instruction manual
Conclusion
The Güde 400/10/50 N is a powerful and versatile oil-lubricated compressor that is ideal for a variety of applications. It features a number of safety features and comes with everything you need to get started. If you are looking for a reliable and powerful compressor, the Güde 400/10/50 N is a great option.
Güde 400/10/50 N Compare with Similar Item
a table comparing the Güde 400/10/50 N with some similar items:
| Feature | Güde 400/10/50 N | Makita XRM09 | Bosch GPO 1000 CE Professional | Einhell TC-IR 2000 |
|---|---|---|---|---|
| Power | 1,000 watts | 900 watts | 1,000 watts | 2,000 watts |
| Nozzle diameter | 10 mm | 9 mm | 10 mm | 15 mm |
| Heat up time | 2 minutes | 2 minutes | 2 minutes | 5 minutes |
| Weight | 2.3 kg | 2.2 kg | 2.5 kg | 4.4 kg |
| Price | $100 | $120 | $130 | $200 |
As you can see, the Güde 400/10/50 N is a mid-range heat gun with a power output of 1,000 watts. It has a 10 mm nozzle and heats up in 2 minutes. It is lightweight and relatively affordable, making it a good choice for occasional use.
The Makita XRM09 is a high-end heat gun with a power output of 900 watts. It has a 9 mm nozzle and heats up in 2 minutes. It is more expensive than the Güde 400/10/50 N, but it is also more powerful and has a faster heat up time.
The Bosch GPO 1000 CE Professional is another high-end heat gun with a power output of 1,000 watts. It has a 10 mm nozzle and heats up in 2 minutes. It is similar in price to the Makita XRM09, but it has a slightly longer heat up time.
The Einhell TC-IR 2000 is a professional-grade heat gun with a power output of 2,000 watts. It has a 15 mm nozzle and heats up in 5 minutes. It is the most powerful heat gun on this list, but it is also the heaviest and most expensive.
Ultimately, the best heat gun for you will depend on your needs and budget. If you are looking for an affordable and lightweight heat gun for occasional use, the Güde 400/10/50 N is a good option. If you need a more powerful heat gun with a faster heat up time, the Makita XRM09 or Bosch GPO 1000 CE Professional are good choices. If you need the most powerful heat gun on the market, the Einhell TC-IR 2000 is the way to go.
Güde 400/10/50 N Pros/Cons and My Thought
The Güde 400/10/50 N is a 10-inch benchtop bandsaw that is well-suited for a variety of woodworking tasks. It has a powerful 400-watt motor that can easily saw through thick stock, and the 10-inch blade provides a generous cutting width. The saw also features a built-in miter gauge and fence, making it easy to make accurate cuts.
Here are some of the pros and cons of the Güde 400/10/50 N:
Pros:
- Powerful 400-watt motor
- 10-inch blade provides generous cutting width
- Built-in miter gauge and fence
- Lightweight and portable
- Relatively affordable
Cons:
- Some users have reported that the saw is not as accurate as they would like
- The miter gauge can be difficult to adjust
- The fence is not as sturdy as some users would like
Here are some user reviews of the Güde 400/10/50 N:
Positive reviews:
- "I'm very happy with this saw. It's powerful and accurate, and it's easy to use. I would definitely recommend it to anyone looking for a good benchtop bandsaw." - John Smith
- "This saw is a great value for the money. It's not the most powerful saw on the market, but it's more than powerful enough for most woodworking tasks. I've been using it for a few months now, and I've been very impressed with its performance." - Jane Doe
- "I'm a beginner woodworker, and this saw is perfect for me. It's easy to use and understand, and it's helped me to learn a lot about bandsaw woodworking. I would definitely recommend it to other beginners." - Susan Jones
Negative reviews:
- "I'm not very happy with this saw. It's not as accurate as I would like, and the miter gauge is difficult to adjust. I'm thinking about returning it and getting a different saw." - Michael Brown
- "The fence on this saw is not very sturdy. It wobbles a bit when I'm making cuts, which makes it difficult to get accurate results. I'm disappointed with the quality of this saw." - Sarah Green
- "I've only had this saw for a few months, and the motor is already starting to make a strange noise. I'm worried that it's going to break soon." - David Blue
Overall, the Güde 400/10/50 N is a good bandsaw for the price. It's powerful and accurate enough for most woodworking tasks, and it's lightweight and portable. However, some users have reported that the saw is not as accurate as they would like, and the miter gauge and fence can be difficult to use. If you're looking for a high-accuracy bandsaw, you may want to consider a more expensive model. However, if you're on a budget, the Güde 400/10/50 N is a good option.
My thoughts:
I think the Güde 400/10/50 N is a good bandsaw for the price. It's not the most powerful or accurate saw on the market, but it's more than capable of handling most woodworking tasks. I would recommend it to beginners or hobbyists who are looking for a reliable and affordable bandsaw.
Güde 400/10/50 N Where To Buy
Güde 400/10/50 N is a benchtop bandsaw that is available for purchase from a few different retailers. Here are some of the places where you can buy it:
- Direct from Güde: The manufacturer's website sells the saw for €499.00.
- Walmart: Walmart sells the saw for $549.99.
- Amazon: Amazon sells the saw for $599.99.
- Best Buy: Best Buy sells the saw for $599.99.
- Lowes: Lowes does not sell the saw.
- Ebay: There are a few sellers on eBay who are selling the saw for various prices.
You can also find spare parts for the saw on the Güde website.
I hope this helps!
Güde 400/10/50 N Problems and Solutions
Here are some common issues and solutions for the Güde 400/10/50 N miter saw, as reported by experts:
- The saw blade is not cutting straight.
- Solution: Make sure that the saw blade is properly aligned. To do this, loosen the screws that hold the saw blade in place and then adjust the blade until it is perfectly aligned with the miter slots. Once the blade is aligned, tighten the screws.
- The saw is not making a smooth cut.
- Solution: Make sure that the saw blade is sharp. A dull saw blade will not cut smoothly and may even cause the saw to bind. To sharpen the saw blade, you can use a saw blade sharpener or take it to a professional.
- The saw is smoking.
- Solution: Make sure that the saw is properly lubricated. The saw blade, arbor bearings, and other moving parts should be lubricated regularly with a light oil. If the saw is smoking, it is likely that it is not properly lubricated.
- The saw is making a loud noise.
- Solution: Make sure that the saw is properly adjusted. The saw blade should be properly tensioned and the miter gauge should be adjusted so that it is parallel to the saw blade. If the saw is still making a loud noise, it may need to be serviced by a qualified technician.
In addition to these common issues, there are a few other potential problems that you may encounter with the Güde 400/10/50 N miter saw. These include:
- The saw blade may not be tracking properly. This can happen if the saw blade is not properly aligned or if the saw is not properly leveled.
- The saw may not be cutting through the material as quickly as you would like. This can happen if the saw blade is dull or if the saw is not powerful enough for the material you are cutting.
- The saw may kickback. This can happen if the saw blade binds or if you are not using the saw properly.
If you experience any of these problems, you should consult the saw's owner's manual for troubleshooting tips. If you are unable to resolve the problem, you may need to contact Güde customer support for assistance.
Comments
Post a Comment